Product Description
The MTC Mamba Pro 3-18 x 50 with SCB2 Reticle.
A popular stable-mate to Viper Pro with which it shares the same specification but features low profile turrets instead of the 3-1 micro-gearbox fitted to the Viper Pro.
The scope has just been updated to include finger-turn semi target turrets which replaces the coin-slot style turrets used previously.
The finish has also been updated to a purposeful matt back rather than the satin finish of the original scope.
Mamba Pro features:
- MTC SCB2 Reticle
- x6 times scopes to extend magnification range without sacrificing optical performance
- Super bright multi coated optics for a new standard of light transfer
- Magnetic, rotating flip-up lens covers
- Magnifying lens in rear cover for easy viewing of parallax and dial markings
- Low profile windage and elevation finger-turn semi target turrets
- Side parallax - 10 yds to infinity
- Illuminated reticle with separate on/off and brightness button
MTC SCB2 Reticle:
The Small Calibre Ballistic (SCB) reticle offers an incredible amount of aim points with a floating cross for clear and accurate target acquisition.
This is ideal for use on small targets.
The 1 mil dot square around the cross gives a rapid acquisition for small fast-moving targets such as rats.
When shooting at small targets or when bullet drop becomes critical the versatility of this reticule becomes clear.
Mamba Pro Technical Specifications:
- MTC Mamba Pro 3-18x50
- Magnification - 3-18x
- Objective Lens - 50mm
- FOV @ 100m - 12.8m / 2.3m
- Diopter Adj - +/-2
- Eye Relief - 86mm
- Parallax Setting - 10m - infinity
- Adj per click - 1/4 MOA
- Max Windage Adj 73 - MOA
- Max Elevation Adj 73 - MOA
- Clicks per one turret revolution - 56
- MOA per one turret revolution - 14
- MOA per one Distance Disc revolution - 42
- Impact point correction in one click @ 100m - 0.7cm
- Impact point correction in one click @ 100yds - 0.26 inches
- Tube - 30mm
- Illuminated reticle with separate on/off and brightness control
- Length - 380mm
- Weight - 725g
- Number of steps in one Distance Disc revolution - 168
- Length of range tape if placed on top of MOA ring - 94.2mm
- Length of range tape if placed carriage directly - 89.9mm
